| |
Note: The MX-FNX4 can be connected directly to the MX-RBX2 or MX-CFX1,
and the MX-FNX3 to the MX-RBX2, but the MX-FNX3 requires
a punch module when using with the MX-CFX1.
The MX-FRX3 and MX-AMX2/3 cannot be attached at the same time.
Some options may not be available in some areas.
|
Specifications for Options
MX-FNX1 Finisher
| Paper size |
|
| |
Non offset |
A3W to A5R* (12" x 18" to 5 1/2" x 8 1/2R") |
| |
Offset/staple |
A3 to B5 (11" x 17" to 8 1/2" x 11R") |
| Paper capacity (max.) |
500 sheets (A4 or smaller),
250 sheets (B4 or larger) |
| Stapling capacity |
50 sheets (A4 or smaller), 30 sheets (B4 or larger) |
| Staple position |
3 locations (front, rear or both) |
MX-FNX2 Saddle Stitch Finisher
| Paper size |
|
| |
Non offset |
A3W to A5R* (12" x 18" to 5 1/2" x 8 1/2R") |
| |
Offset/staple |
A3 to B5R (11" x 17" to 8 1/2" x 11R") |
| Paper capacity (max.) |
|
| |
Offset tray |
1,000 sheets (A4 or smaller, except A5R),
500 sheets (A5R, B4 or larger) |
| |
Saddle stitch tray |
10 sets of 6-10 sheets,
20 sets of 1-5 sheets |
| |
Stapling capacity |
30 sheets (A4 or smaller),
25 sheets (B4 or larger) |
| Staple position |
3 locations (front, rear or both) |
* Except A5 size
Punch Modules
| Model name |
|
| |
For the MX-FNX1 |
MX-PNX1A |
MX-PNX1B |
MX-PNX1C |
MX-PNX1D |
| |
For the MX-FNX2 |
AR-PN1A |
AR-PN1B |
AR-PN1C |
AR-PN1D |
| Number of holes |
2 |
3 |
4 |
4 (wide) |
| Paper weight |
55 to 209 g/m2
|
MX-DEX3 Stand with 500-Sheet Paper Drawer
| Paper size |
A3 to B5R (11" x 17" to 7 1/4"
x 10 1/2R") |
| Paper capacity |
500 sheets (80 g/m2) |
MX-DEX4 Stand with 2 x 500-Sheet Paper Drawers
| Paper size (upper and lower
tray) |
A3 to B5R (11" x 17" to 7 1/4"
x 10 1/2R") |
| Paper capacity (upper and lower tray) |
500 sheets each (80 g/m2) |
MX-LCX1 Large-Capacity Tray
| Paper size |
A4, B5 (8 1/2" x 11") |
| Paper capacity |
3,500 sheets (80 g/m2) |
MX-FXX1 Fax Expansion Kit
| Compression method |
MH/MR/MMR/JBIG |
| Communication protocol |
Super G3/G3 |
| Modem speed |
33,000 bps to 2,400 bps |
Sharpdesk 3.2 System Requirements
| CPU and memory |
Depend on operating system used
|
| Hard disk |
300MB or more available space (including sample image files and help files) |
| Monitor |
SVGA resolution or better and capable of displaying more than 256 colours (True Color recommended) |
| Supported OS |
Windows®98 Second Edition,
Windows® Me, Windows®
2000 Professional, Windows® XP Professional,
Windows® XP Home Edition, Windows VistaTM* |
| Network protocols |
TCP/IP (using Network Scanner Tool) |
* Windows Vista 64 bit is supported as 32-bit compatible mode. Sharpdesk Composer does not support Windows Vista 64 bit.
|
