System LSIs

☆New product

■Touch Panel Controller
•Features
*When comparing an S/N ratio of 3.58 determined through the conventional sequential driving method using pen-touch writing on a 20-inch screen with an S/N ratio of 30.65 determined through Sharp’s proprietary parallel driving method (measured by Sharp).
•Application Examples
■System LSIs
Model No.
Function
Features
Supply voltage
(V)
Package
LR388K4
Touch panel controller for tablets
(7 to 10 inches)
• 10-finger multi-touch detection
• Scanning speed: 240 Hz
• Capable of sensing a Φ2 mm pen touch
• USB/I2C/SPI interface
• Built-in palm cancellation feature
Core: 1.2±0.12
I/O: 3.3±0.3
Analog: 3.3±0.3
P-VFBGA360P-0613
■Touch Panel Controller Module
Model No.
Function
Features
Supply voltage
(V)
Outline dimensions
(W × D)
(mm)
LR0G964
Touch panel controller module
for midium-size screens
(10 to 15.6 inches)
• 10-finger multi-touch detection
• Scanning speed: 240 Hz
• Capable of sensing a Φ2 mm pen touch
• Built-in palm cancellation feature
• USB interface
• Built-in power supply circuit
5
74 × 46
☆LR0G970
Touch panel controller module
for midium-size screens
(15.6 to 27 inches)
• 10-finger multi-touch detection
• Scanning speed: 240 Hz
• Capable of sensing a Φ2 mm pen touch
• Built-in palm cancellation feature
• USB interface
• Built-in power supply circuit
• Compatible with active pen
5
50 × 90
LR0G967
Touch panel controller module
for midium-size screens
(15 to 32 inches)
• 10-finger multi-touch detection
• Scanning speed: 240 Hz
• Capable of sensing a Φ2 mm pen touch
• Built-in palm cancellation feature
• USB interface
• Built-in power supply circuit
5
60 × 80
☆LR0G971
Touch panel controller module
for large-size screens
(Over 42 inches)
• 50-finger multi-touch detection
• Scanning speed: 120 Hz
• Capable of sensing a Φ2 mm pen touch
• Built-in palm cancellation feature
• USB interface
• Built-in power supply circuit
5
100 × 220
※Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.