PN-V601
LCD MONITOR
Ultra-Slim Bezel Creates
New Multi-Screen World
Model Name |
PN-V601 |
Installation |
Landscape/Portrait |
LCD Panel |
|
60-inch widescreen (152.4 cm diagonal), TFT LCD |
Max. Resolution |
1,366 x 768 pixels |
Max. Display Colours (approx.) |
16.77 million colours |
Pixel Pitch (H x V) |
0.973 x 0.973 mm |
Brightness*1 |
700 cd/m2 |
Contrast Ratio |
2400:1 |
Viewing Angle (H/V) |
176°/176° (CR ≥ 10) |
Active Screen Area (W x H) |
1,328.8 x 747.1 mm (52 5/8" x 29 7/16") |
Response Time |
6 ms (grey to grey, avg.) |
Computer Input |
Video |
Analogue RGB (0.7 Vp-p) [75Ω], Digital (conforms to DVI 1.0 standards) |
Synchronisation |
Horizontal/vertical separation (TTL: positive/negative), Sync on green,
Composite sync (TTL: positive/negative) |
Plug & Play |
VESA DDC2B |
Power Management |
VESA DPMS, DVI DMPM |
Video Colour System |
NTSC (3.58 MHz, 4.43 MHz)**, PAL, PAL60, SECAM |
Input
Terminals*2 |
PC/AV Video |
DVI-D 24-pin** (HDCP compatible), Analogue mini D-sub 15-pin,
Analogue BNC** |
PC/AV Audio |
3.5 mm-diameter mini stereo jack x 1 |
Video |
BNC x 1** |
S-Video |
1** |
Component |
BNC (Y, Cb/Pb, Cr/Pr) x 1** |
HDMI |
1 (1080p compatible)*3 |
Audio |
RCA pin (L/R) x 2** |
Other |
Control Kit terminal x 1 |
Output
Terminals*2 |
Computer Signal |
DVI-D 24-pin** |
Audio |
RCA pin (L/R) |
Speakers |
10W + 10W (6Ω)** |
Input/Output
Terminals*2 |
LAN Port |
1** |
RS-232C |
D-sub 9-pin (input x 1, output x 1) |
Speaker Output |
10W + 10W |
Mounting |
VESA (6 points), 200 mm (7 7/8") pitch, M6 screw or
VESA (4 points), 200 mm (7 7/8") pitch, M6 screw |
Power Supply |
100V – 240V AC, 50/60 Hz |
Power Consumption |
480W |
Environmental
Conditions |
Operating Temperature |
0°C to 40°C |
Operating Humidity |
20% to 80% RH (no condensation) |
Bezel Frame Width |
Right/bottom: 2.4 mm, Left/top: 4.1 mm |
Dimensions
(approx.) |
W x D x H |
1,335.9 x 149.3 x 754.2 mm (52 5/8" x 5 7/8" x 29 11/16") |
Weight (approx.) |
44 kg (96.9 lbs) |
Main Accessories |
Power cord (3-pin*4, approx. 3 m), operation manual, CD-ROM,
stand hole protection cover |
- *1 Brightness will depend on input mode and other picture settings. Brightness level will decrease over time. Due to the nature of the equipment, it is not possible to precisely maintain a constant level of brightness.
- *2 Use a commercially available connection cable for PC and other video connections.
- *3 For both PC and AV components.
- *4 Use a 3-pin compatible power outlet.
- ** Requires separately sold Interface Expansion Board.
For horizontal (face-up) installation, the optional PN-ZR31 Fan Cover is required. For details, consult your Sharp dealer/representative.
Design and specifications are subject to change without prior notice.